Skip to content
LoveToCalc

Theorem or definition?

Above every formula here stands a word: definition, theorem, identity or law. It says where the formula comes from — whether it is true because someone decided it, or true because someone showed it.

The difference is rarely visible in the formula itself. The circumference of a circle and the area of a circle look equally self-evident, but one of them fixes what π is and the other has to be shown using it. Knowing which is knowing what you are allowed to lean on when you prove something else.

Definition

The formula is what fixes the quantity. There is nothing underneath it to prove, because this is where the word gets its meaning. The area of a rectangle is base times height — that is what area means for a rectangle, not something that follows from anything else. And writing the circumference of a circle as 2πr is at the same time saying what π is: the number the ratio of circumference to diameter always lands on.

In this collection: Percentage of a number, Percentage change, Change factor, Sale price after a discount, Scale, Zero exponent, Negative exponent, Power equation, Fraction to decimal, Fraction to percentage, Direct proportion, Inverse proportion, Percentage points, Index number, Scientific notation, Congruence and modular arithmetic, Absolute value, Absolute value, the definition, Proportional to the square, Inversely proportional to the square, Complex numbers in rectangular and polar form, Modulus and argument, Adding complex numbers, Subtracting complex numbers, Complex conjugate, Complex numbers in exponential form, Linear equation, Equation with x on both sides, Area of a rectangle, Perimeter of a triangle, Perimeter of a regular polygon, Circumference of a circle, Arc length in radians, Equation of a circle, Volume of a cuboid, Lateral area of a prism, Surface area of a prism, Lateral area of a pyramid, Surface area of a pyramid, Lateral area of a cylinder, Lateral area of a cone, Surface area of a cone, Paint needed, Wallpaper rolls, Flooring with waste, Soil needed, Gravel in tonnes, Vector addition, Scalar multiplication of a vector, Dot product, Cross product, Equation of a plane, Point-normal equation of a plane, Parametric equation of a plane, Vector equation of a line, Equation of a sphere, Equation of an ellipse, Equation of a hyperbola, Golden ratio, Scalar triple product, Scalar projection, Vector projection, Diameter and radius, Sine in a right triangle, Cosine in a right triangle, Tangent in a right triangle, Sinusoidal function, Degrees to radians, Radians to degrees, Cosine on the unit circle, Sine on the unit circle, Polar to cartesian coordinates, Cartesian to polar coordinates, Composite function, Inverse function, Power function, Oblique asymptote, Sign function, Equation of a straight line, Slope from two points, Angle of a line, General form of a line, The discriminant, Vertex form of a parabola, Exponential growth, Exponential equation, Definition of the logarithm, The natural logarithm, Half-life, Logistic growth, Bounded growth, Recursive sequence, Common difference, Determinant of a 2×2 matrix, Determinant of a 3×3 matrix, Characteristic polynomial of a 2×2 matrix, Gaussian elimination, Matrix multiplication, Quadratic form, Average rate of change, Area under a curve, Equation of a tangent, Stationary points, Definition of the derivative, Trapezoidal rule, Simpson's rule, The differential equation y′ = ky, The differential equation y′ = f(x), First-order linear differential equation, Second-order linear differential equation, Non-homogeneous second-order linear differential equation, Average value of a function, Separable differential equation, Taylor polynomial of degree 2, Linear approximation (linearisation), Bisection method: one step, Secant method: one step, Euler's method: one step, Central difference for the derivative, Midpoint rule, Partial derivative, Gradient, Equation of a tangent plane, Level curves and level surfaces, Total differential, Error propagation (linear, worst case), Error propagation in quadrature, Second-order Taylor polynomial in two variables, Jacobian determinant, Horizontal asymptote, Vertical asymptote, Probability of an event, Conditional probability, Relative frequency, Z-score, Mean, Weighted mean, Median, Range, Geometric mean, Harmonic mean, Expected value, Variance, Sample variance, Standard deviation, Sample standard deviation, Interquartile range, Factorial, Permutations, Combinations, Multiplication principle, Binomial distribution, Expected value of the binomial distribution, Variance of the binomial distribution, Hypergeometric distribution, Mode, Correlation coefficient, Least-squares line, Coefficient of determination, Confidence interval (margin of error), Normal distribution, Poisson distribution, Expected value and variance of the Poisson distribution, Exponential distribution, Exponential distribution, the density, Expected value of the exponential distribution, Variance of the exponential distribution, Standard error of the mean, Sample size for a proportion, T-statistic, Chi-square statistic, Confidence interval for a proportion, Prediction interval for a sample proportion, Phi coefficient, Effect size (Cohen's d), Maximum difference in cumulative percentage, Prediction from the regression line, Confidence interval for a mean, Sample size for a mean, Standard error of a proportion, Slope of the regression line, Mean of the uniform distribution, Variance of the uniform distribution, Mean of the geometric distribution, Variance of the geometric distribution, Survival function of the exponential distribution, Coefficient of variation, Z test statistic for a mean, Z test statistic for a proportion, Paired t statistic, Expected frequency in a contingency table, T statistic for the slope, Probability for the uniform distribution, Uniform distribution, the density, Geometric distribution, Geometric distribution: success within k tries, Poisson process: k events in a time interval, Correlation from covariance, Confidence interval for a difference of means, Confidence interval for a difference of proportions, Z test statistic for two proportions, Two-sample t statistic (Welch), Residual variance of a regression, Sensitivity, Specificity, Positive predictive value, Negative predictive value, Relative risk, Odds ratio, Positive likelihood ratio, Distance, speed and time, Acceleration, Distance under constant acceleration, Velocity without time, Free fall, Pace per kilometre, Fuel consumption, Projectile motion — range, Projectile motion — maximum height, Projectile motion — time of flight, Projectile launched horizontally — range, Relative velocity, Projectile motion — horizontal velocity, Projectile motion — vertical velocity, Projectile motion — speed at a moment, Projectile motion — direction of the velocity, Projectile motion — horizontal launch speed, Projectile motion — vertical launch speed, Projectile motion — horizontal distance, Projectile motion — height at a time, Projectile motion — time to the top, Distance from the average speed, Velocity as a derivative, Acceleration as a derivative, Newton's second law, Weight, Friction force, Momentum, Moment of a force, Forces on an inclined plane, Pulley system, Density, Pressure, Work, Work done by a force at an angle, Power, Kinetic energy, Potential energy, Efficiency, Law of gravitation, Gravitational field strength, Escape velocity, Orbital velocity, Kepler's third law, Gravitational potential energy (−GMm/r), Centripetal acceleration, Centripetal force, Tangential speed, Hydrostatic pressure, Archimedes' principle, Pascal's principle, Drag force, Terminal velocity, Impulse, Conservation of momentum in a perfectly inelastic collision, Angular velocity, Hooke's law, Elastic potential energy, Torque, Moment of inertia (solid disc), Newton's second law for rotation, Rotational kinetic energy, Angular momentum, Stress, Strain, Young's modulus, Volume flow rate, Continuity equation, Bernoulli's equation, Reynolds number, Poiseuille's law, Speed from angular velocity, Speed from frequency, Angular velocity from frequency, Centripetal acceleration from angular velocity, Centripetal acceleration from the period, Centripetal acceleration from frequency, Centripetal force from the period, Normal force on an inclined plane, Acceleration on a frictionless slope, Acceleration on a slope with friction, Friction coefficient from the limiting angle, Conservation of momentum from rest, Conservation of momentum for two bodies, Conservation of kinetic energy in a collision, Equilibrium of moments, Conservation of mechanical energy, Newton's third law, Impulse–momentum theorem, Friction on a slope at rest, Normal force balance on a slope, Efficiency from power, Ohm's law, Electric power, Electric energy in kWh, Resistance in series, Resistance in parallel, Resistivity, Coulomb's law, Electric field strength, Uniform electric field, Electric field from a point charge, Charge in an electric field, Electric potential energy, Electrical work, Electric charge, Capacitance, Parallel-plate capacitor, Energy stored in a capacitor, Capacitors in series, Capacitors in parallel, Force on a current-carrying conductor, Force on a moving charge in a magnetic field, Charged particle in a magnetic field, Magnetic flux, Magnetic field around a straight conductor, Magnetic field inside a solenoid, Induced EMF, EMF of a moving rod, Generator EMF, Transformer equation, Transformer current ratio, RC time constant, Charging a capacitor, Discharging a capacitor, RL time constant, Energy stored in an inductor, Resonant frequency of an LC circuit, Capacitive reactance, Inductive reactance, Impedance of an RLC circuit, Power factor, RMS voltage, Apparent power, Real power, Reactive power, Hall voltage, Inductance of a solenoid, Self-induced EMF, Intensity of an electromagnetic wave, Fundamental frequency of a half-wave dipole, Electric potential of a point charge, Capacitor with a dielectric, Mutual inductance, Quality factor of an RLC circuit, Capacitance of an isolated sphere, Magnitude of the Poynting vector, Power from resistance and current, Power from voltage and resistance, Electrical energy from voltage, current and time, Electrical energy from resistance, current and time, Electrical energy from voltage, resistance and time, Alternating voltage, RMS current, Potential energy in a uniform field, Electric potential, Potential difference, LED series resistor, Voltage divider, Heat energy, Celsius to Fahrenheit, Celsius to kelvin, Mean kinetic energy of a gas molecule, First law of thermodynamics, Carnot efficiency, Entropy change, Isothermal work, Adiabatic process, Clausius-Clapeyron relation, Latent heat, Linear thermal expansion, Heat conduction, Convective heat transfer, Stefan-Boltzmann law, Wien's displacement law, Energy from calorific value, Pressure–volume work, Heat engine efficiency, Carnot refrigerator coefficient of performance, Carnot heat pump coefficient of performance, Otto cycle efficiency, Heat capacity ratio, Heat at constant volume or constant pressure, Enthalpy, Wave speed, Frequency and period, Pendulum period, Doppler effect — moving source, Doppler effect — moving observer, Standing wave on a string, Resonance in an open pipe, Resonance in a closed pipe, Snell's law of refraction, Refractive index, Critical angle for total internal reflection, Thin lens equation, Lens magnification, Double-slit interference condition, Young's double-slit fringe spacing, Diffraction grating equation, Spring oscillator period, Simple harmonic motion, Maximum velocity in simple harmonic motion, Damped oscillation, Sound intensity level, Malus's law, Sound pressure level, Inverse-square law, Single-slit diffraction minima, Bragg's law, Rayleigh criterion, Brewster's angle, Phase difference, Sinusoidal wave equation, Velocity in simple harmonic motion, Acceleration in simple harmonic motion, Acceleration and displacement in SHM, Maximum acceleration in simple harmonic motion, Angular frequency of a spring oscillator, Spring oscillator frequency, Oscillation energy from the spring constant, Oscillation energy from mass and angular frequency, Energy exchange in an oscillation, Constructive interference, Destructive interference, Doppler effect — source moving away, Doppler effect — observer moving away, Optical power (dioptre), Velocity of an oscillation as a derivative, Acceleration of an oscillation as a derivative, Restoring force in simple harmonic motion, Intensity as power per area, Mass-energy equivalence, Lorentz factor, Time dilation, Length contraction, Relativistic momentum, Relativistic kinetic energy, Photon energy, Photon energy from wavelength, Compton scattering, Photoelectric effect, De Broglie wavelength, Heisenberg uncertainty principle, Particle in a box — energy levels, Radioactive decay, Half-life and decay constant, Activity, Absorbed dose, Equivalent dose, Mass defect, Bohr model — energy levels, Rydberg formula, Energy–time uncertainty, Energy levels of hydrogen-like atoms, Galilean transformation, Lorentz transformation of position, Lorentz transformation of time, Energy–momentum relation, Absorption law, Half-value thickness, Effective dose, Q-value of a nuclear reaction, Schwarzschild radius, Distance from parallax, Distance modulus, Apparent magnitude (Pogson's relation), Redshift (Doppler effect for light), Relativistic total energy, Relativistic velocity addition, Relativistic Doppler effect, Fraction of muons reaching the ground, Gravitational time dilation, Bohr radius of orbit n, Duane–Hunt law (shortest X-ray wavelength), Quantum harmonic oscillator — energy levels, Particle in a box — transition wavelength, Quantum tunnelling through a barrier, Rigid rotor — energy levels, Fermi energy of an electron gas, Thermal de Broglie wavelength, Zeeman splitting — energy shift, Energy of an atomic transition, Photon momentum, Mass number, Alpha decay, Beta-minus decay, Beta-plus decay, Electron capture, Alpha decay — atomic number, Beta-minus decay — mass number, Beta-plus decay — mass number, Electron capture — mass number, Kinetic energy from total energy, Nuclear mass from nuclide mass, Amount of substance, Percent yield, Avogadro's number, Molar reaction enthalpy, Gibbs free energy, Faraday's law of electrolysis, Nernst equation, Cell potential of a galvanic cell, Decomposition voltage, Atom economy, E-factor, Concentration, Dilution, Mass percent, Mass concentration, Volume percent, Parts per million, Beer-Lambert law, Specific rotation, Raoult's law, Osmotic pressure, Boiling point elevation, Freezing point depression, Reaction rate, First-order integrated rate law, First-order half-life, Zero-order integrated rate law, Second-order integrated rate law, Arrhenius equation, Equilibrium constant, Gibbs energy and equilibrium constant, Solubility product, Partition coefficient, Retention factor, Mole fraction, Equilibrium constant, general form, Solubility product, general form, Molality, Degree of unsaturation, Titration at the equivalence point, Ideal gas law, Boyle's law, Gay-Lussac's law, Charles's law, Combined gas law, Van der Waals equation, RMS speed of gas molecules, Molar volume, Partial pressure, pH, Ion product of water, pOH, pH and pOH, Acid dissociation constant, pKa, pH of a weak acid, Henderson-Hasselbalch equation, Base dissociation constant, Buffer capacity, Simple interest, Simple interest: total to repay, Compound interest, Doubling time, Compound annual growth rate, Inflation-adjusted amount, Real interest rate, Continuous compounding, Straight-line amortization, Debt-to-income ratio, Monthly interest cost, Loan to value, Interest rate sensitivity, Effective annual rate, Profit margin, Markup, Return on investment, Break-even quantity, Present value of a perpetuity, Gordon growth model, CAPM, WACC, Payback period, Net present value (NPV), Internal rate of return (IRR), Bond price, Price elasticity of demand, Arc elasticity (midpoint method), Marginal cost, Consumer surplus, Unit cost, Modified internal rate of return (MIRR), CPM (cost per thousand impressions), CPC (cost per click), CPA (cost per acquisition), CTR (click-through rate), ROAS (return on ad spend), CAC (customer acquisition cost), Customer lifetime value (LTV, CLV), Return on equity (ROE), Return on assets (ROA), Return on invested capital (ROIC), Operating margin (EBIT margin), EBITDA, EBITDA margin, Current ratio, Quick ratio (acid test), Cash ratio, Debt-to-equity ratio, Equity ratio (solidity), Interest coverage ratio, Days sales outstanding (DSO), Days payable outstanding (DPO), Days inventory outstanding (DIO), Cash conversion cycle (CCC), Inventory turnover, Working capital, Price-earnings ratio (P/E), Dividend yield, Payout ratio, PEG ratio, Market capitalisation, Book value per share, VAT on a net price, VAT out of a gross price, Price per square metre, Cost of electricity, Heating cost, Unit price, Tip, Splitting a bill, Fuel cost of a trip, Cost per kilometre, Currency conversion, Overtime pay, Hourly wage to monthly pay, Body mass index (BMI), Waist–hip ratio, Waist-to-height ratio

Theorem

True, but for reasons that are not a run of rewritings. The Pythagorean theorem is shown with figures — squares rearranged — and the area of a circle follows from its circumference, not from the definition of area. A theorem is something you win, and that is also why it is something you may lean on afterwards.

In this collection: Successive percentage change, Product of powers, Quotient of powers, Power of a power, Power of a product, Power of a quotient, Root of a product, Root of a quotient, Fractional exponent, Adding fractions, Subtracting fractions, Multiplying fractions, Dividing fractions, Mixed numbers, Cross multiplication, Share of a ratio, Greatest common divisor, Least common multiple, Binomial theorem, Product and quotient in polar form, De Moivre's formula, Multiplying complex numbers, Dividing complex numbers, A complex number times its conjugate, Argument of a complex number, Product in exponential form, Quotient in exponential form, Subtracting a negative number, Product with one negative factor, Minus times minus, Sign rules for division, Adding a negative number, Negative times positive, Dividing by a negative number, Negative divided by negative, Pythagoras' theorem, Perimeter of a rectangle, Area of a square, Perimeter of a square, Area of a triangle, Area of a parallelogram, Area of a trapezoid, Area of a rhombus, Area of a kite, Area of an ellipse, Area of a regular polygon, Angle sum of a triangle, Exterior angle theorem, Vertical angles, Co-interior angles, Area of an equilateral triangle, The 45-45-90 triangle, The 30-60-90 triangle, Similar triangles, Parallel cut in a triangle, Transversal theorem, Angle bisector theorem, Heron's formula, Converse of the Pythagorean theorem, Magnitude of a vector, Angle sum of a quadrilateral, Angle sum of a polygon, Area of a circle, Area of a sector, Arc length, Sector area in radians, Area of an annulus, Area of a segment, Inscribed angle theorem, Thales' theorem, Intersecting chords theorem, Parametric equation of a circle, Volume of a cube, Surface area of a cube, Surface area of a cuboid, Space diagonal of a cuboid, Volume of a prism, Volume of a pyramid, Volume of a cylinder, Surface area of a cylinder, Volume of a cone, Volume of a sphere, Surface area of a sphere, Area scale factor, Volume scale factor, Concrete needed, Pool volume, Angle between two vectors, Distance from a point to a plane, Parabola with focus and directrix, Geometric mean theorem, Leg theorem, Triangle area from the cross product, Angle between two planes, Angle between a line and a plane, Distance from a point to a line in space, Parallelepiped volume from three vectors, Tetrahedron volume from three vectors, Volume of a hemisphere, Total surface area of a hemisphere, Volume of an ellipsoid, Volume of a torus, Surface area of a torus, Volume of a frustum of a cone, Surface area of a frustum of a cone, Volume of a regular tetrahedron, The law of sines, The law of cosines, Area with the sine rule, Roof area from pitch, Tangent as a quotient, The Pythagorean identity, Sine addition formula, Cosine addition formula, Harmonic form, Trigonometric symmetry and reduction formulas, Cosine of 180° − v, Tangent of 180° − v, Sine of v − 180°, Cosine of v − 180°, Tangent of v − 180°, Sine of 360° − v, Cosine of 360° − v, Tangent of 360° − v, Sine of 90° − v, Cosine of 90° − v, Tangent of 90° − v, Sine of −v, Cosine of −v, Tangent of −v, Product-to-sum: cos u sin v, Product-to-sum: cos u cos v, Product-to-sum: sin u sin v, Sum-to-product: sin u − sin v, Sum-to-product: cos u + cos v, Sum-to-product: cos u − cos v, Cosine as a shifted sine, Harmonic form with a minus, Point-slope form, Distance between two points, Distance from a point to a line, Midpoint, Parallel lines, Perpendicular lines, Two-point form, The pq formula, The quadratic formula, Axis of symmetry, Vieta's formulas, Remainder theorem, Polynomial division, Quadratic equation with complex roots, Logarithm of a product, Logarithm of a quotient, Logarithm of a power, Change of base, Logarithm of one, Power of a logarithm, Arithmetic sequence, Sum of an arithmetic series, Geometric sequence, Sum of a geometric series, Infinite geometric series, Cramer's rule, Inverse of a 2×2 matrix, Eigenvalues of a 2×2 matrix, Cramer's rule for three equations, Rank of a matrix, Vector spaces and subspaces, Linear independence, Basis and dimension, Change of basis, Matrix of a linear map, Least squares solution, Orthogonal projection onto a subspace, Power rule, Sum rule, Product rule, Quotient rule, Derivative of eˣ, Derivative of ln x, Derivative of sine, Derivative of cosine, Derivative of tan x, Antiderivative of a power, Antiderivative of sin x, Antiderivative of cos x, Antiderivative of 1/x, The definite integral, Volume of revolution, Integration by parts, Integration by substitution, Chain rule, Limits, L'Hôpital's rule, Standard limits, Arc length of a curve, Fundamental theorem of calculus, Taylor remainder (Lagrange form), Taylor polynomial for the exponential function, Taylor polynomial for the sine, Taylor polynomial for the natural logarithm of 1 + x, Maclaurin expansion of eˣ, Maclaurin expansion of sin x, Maclaurin expansion of cos x, Maclaurin expansion of ln(1 + x), Maclaurin expansion of arctan x, Maclaurin expansion of (1 + x)^α, Bisection method: number of iterations, Error bound for the trapezoidal rule, Error bound for Simpson's rule, Error bound for an alternating series, Derivative of an inverse function, Radius of convergence from the ratio test, Improper integral of 1/xᵖ, Chain rule for two variables, Equality of mixed partial derivatives, Chain rule with two parameters, Directional derivative, Tangent plane to a level surface, Implicit differentiation with partial derivatives, Second derivative test for two variables, Lagrange multipliers, Difference rule, Constant factor rule, Derivative of a constant, Derivative of aˣ, Antiderivative of a constant, Antiderivative of eˣ, Constant factor in an integral, Integral of a sum, Integral of a difference, Splitting an integral at a point, Integral with equal limits, Swapping the limits of an integral, Derivative of cx, Derivative of a constant times a power, The limit of (eˣ − 1)/x, Integral of a linear combination, Washer method, Complement rule, Multiplication rule for independent events, Addition rule for probability, Bayes' theorem, Law of total probability, Intercept of the regression line, Computing formula for the variance, Poisson approximation of the binomial distribution, Expected value of a linear transformation, Variance of a linear transformation, Variance of a sum of independent variables, Vis-viva equation, Synodic period, Kepler's third law for two bodies, Elastic collision, Parallel axis theorem (Steiner's theorem), Stokes' law, Sum of moments, Balance of forces, Energy conservation between two points, Kepler's second law, Gravitational force from Kepler's constant, Kinetic energy from work, Total pressure at a depth, Kirchhoff's current law, Kirchhoff's voltage law, Speed of an electromagnetic wave, Field at the centre of a current loop, Force between parallel wires, Gauss's law: flux and enclosed charge, Electric field of an infinite sheet, Capacitance of a spherical capacitor, Capacitance of a cylindrical capacitor, Field on the axis of a current loop, Ampère's law: field inside a wire, Electric field of a line charge, Field inside a uniformly charged sphere, Biot–Savart: field of a finite wire, Electric field at a conductor surface, Inductance of a toroid, Energy density of a magnetic field, Radiation pressure, Internal energy of an ideal gas, Molar heat capacity of an ideal gas at constant volume, Maxwell–Boltzmann: mean speed, Maxwell–Boltzmann: most probable speed, Boltzmann factor and population ratio, Graham’s law of effusion, Entropy change of an ideal gas, Standing wave equation, Hess's law, Reaction enthalpy from bond enthalpies, Entropy change of a reaction, Dalton's law, Ka times Kb, pKa and pKb, Future value of an annuity due, Present value of an annuity due, Annuity formula, Monthly saving for a goal, Markup to margin, Efficient scale, Monopoly profit maximization (Cournot point)

Identity

True for every value, and provable as a chain of equalities: write out the left-hand side, simplify a step at a time and land on the right. That is why the page shows the proof instead of asserting. The square of a sum is one of these — it says nothing new about the world, it says what multiplication already does.

In this collection: Product of the GCD and the LCM, Square of a sum, Square of a difference, Difference of squares, Sum of cubes, Difference of cubes, Cube of a sum, Double angle formula, Power-reduction formula for sine, Power-reduction formula for cosine, Tangent addition formula, Tangent half-angle substitution, Product-to-sum formulas, Sum-to-product formulas, Sine and cosine subtraction formulas, Completing the square

Law

Measured or laid down rather than proved. A constant of nature, a tax rate, a rule some authority wrote down. A law always owes a source and a year, because it can change without the mathematics changing — and a formula that quietly swapped a value is worse than no formula at all.

In this collection: Perimeter of an ellipse (Ramanujan), Moseley's law, Nuclear radius, Mass–luminosity relation, Cepheid period–luminosity relation, Hubble's law, Graham number, Basal metabolic rate (Mifflin–St Jeor), Body fat percentage, men (US Navy method), Body fat percentage, women (US Navy method), Maximum heart rate (Tanaka), Target heart rate (Karvonen), One-rep max (Epley), One-rep max (Brzycki), Body surface area (Mosteller), Lean body mass, men (Boer), Lean body mass, women (Boer), Ideal body weight (Devine)

Concept

No formula at all. A prime is a kind of number, a function a kind of correspondence, a set a kind of collection — there is no equation to write down, only a thing to recognise. That is what separates a concept from a definition: a definition fixes a quantity with a formula, as 2πr fixes the circumference, while a concept is explained with examples, with non-examples and with the misreadings that tend to come with it. A concept’s page says what it is and then shows the formulas that build on it.

In this collection: Square numbers and square roots, Fractions, Decimal numbers and place value, Prime numbers, Divisibility, Long and short scales, Negative numbers, The imaginary unit, Variables, Expressions and equations, Inequalities and intervals, Implication and equivalence, Sets, Angles, Vectors, Radians, The unit circle explained, Functions, Asymptotes, Linear functions, The coordinate plane, Systems of linear equations, Quadratic functions, Polynomials, Exponential functions, The number e, Sequences, Antiderivatives, Differentiability, Second derivative, Continuity, Differential equations, Random experiments, outcomes and sample spaces, Independent and dependent events, Measures of centre and spread, Correlation and causation, Populations and samples, Energy, Force, Electric fields, Photons, Wave–particle duality, Oxidation and reduction, Ions, Chemical equilibrium, Acids and bases, Buffer solutions

The line is not always obvious

The same formula can be a definition in one book and a theorem in another, depending on where you start. Start by saying that π is the circumference divided by the diameter and the area becomes a theorem; start somewhere else and it can go the other way. The label here says where this collection begins, not what is uniquely correct.

All formulas