- E = E° − (R · T)/(z · F) · ln Q
E° is the cell’s standard potential in volts, the cathode’s E° minus the anode’s
(cell potential), R the gas constant 8.314 J/(mol·K), T the temperature in
kelvin, z the number of electrons transferred per formula unit and F Faraday’s constant, 96,485 C/mol.
Q is the reaction quotient: the products’ concentrations over the reactants’, each raised to its
coefficient, with solids left out. E is the cell’s voltage at those concentrations.
Holds for dilute solutions, where Q can be worked out from concentrations rather than activities.
At 25 °C, RT/F · ln 10 is 0.0592 V, so the formula is often written E = E° − (0.0592/z) · log Q.
What it says
When Q is below 1, there are more reactants than products compared with standard conditions, and the
voltage is higher than E°. As the cell runs, the products build up, Q grows, and the voltage falls. When
the cell reaches equilibrium, E = 0 and the battery is flat.
Worked examples
The defaults. A cell with E° = 1.10 V and z = 2 at 298 K, where the product ion is a hundred times more
dilute than the reactant ion, so Q = 0.01. RT/(zF) = 8.314 · 298 / (2 · 96,485) ≈ 0.01284 V and
ln 0.01 ≈ −4.605. E = 1.10 − 0.01284 · (−4.605) = 1.10 + 0.0591 ≈ 1.159 V.
The other way. The same cell with z = 1 and Q = 10: RT/F ≈ 0.02568 V and ln 10 ≈ 2.303, so
E = 1.10 − 0.0591 ≈ 1.041 V.
A tenfold step. With z = 2 and Q = 0.001 instead of 0.01: E ≈ 1.189 V. Every factor of ten in Q moves the
voltage by 0.0592/z, here about 0.030 V.
Common mistakes
- Mixing ln and log. The version with RT/zF uses the natural logarithm. The 0.0592 version uses log₁₀.
- Putting solids into Q. A metal electrode or a solid salt does not appear in the reaction quotient.
- Using the wrong z. It is the electrons transferred in the balanced cell reaction, not the charge on
one ion when the half-reactions have been multiplied up.
- Using degrees Celsius. T is in kelvin.
Frequently asked questions
How is it connected to Gibbs free energy?
ΔG = −zFE. Put ΔG = ΔG° + RT ln Q into it and divide by −zF, and out comes the Nernst equation. A positive
E is the same statement as a negative Gibbs free energy.
What happens at equilibrium?
E = 0 and Q equals the equilibrium constant K, so E° = (RT/zF) · ln K. A standard potential can be turned
into an equilibrium constant this way.