Skip to content
LoveToCalc

Theorem — what does that mean?

Hess's law

An enthalpy change does not depend on the route. So any reaction can be worked as taking the reactants apart into elements and building the products from them.

In Swedish: Hess lag

Hess's law

The relation

ΔH°=ΣnpiΔHpi−(ΣnriΔHri)

The reaction enthalpy is the sum of the products’ formation enthalpies, each times its coefficient, minus the same sum for the reactants.

Separate the numbers with spaces, commas or semicolons, for example 2.5, 4, 7

Separate the numbers with spaces, commas or semicolons, for example 2.5, 4, 7

Separate the numbers with spaces, commas or semicolons, for example 2.5, 4, 7

Separate the numbers with spaces, commas or semicolons, for example 2.5, 4, 7

ΔH°=−890.57

ΔH° equals ((1 times (−393.51)) plus (2 times (−285.83))) minus ((1 times (−74.6)) plus (2 times 0)), equals (−393.51 plus (−571.66)) minus (−74.6 plus 0), equals −965.17 minus (−74.6), equals −890.57

Working4 steps

The formula

ΔH° = Σ n · ΔHf°(products) − Σ n · ΔHf°(reactants)

ΔHf° is a substance’s standard enthalpy of formation in kJ/mol, and n its coefficient in the balanced equation. Elements in their standard form, such as O₂(g), H₂(g) and C(graphite), have an enthalpy of formation of 0.

Holds at standard conditions, 25 °C and 1 bar, when every substance’s state matches the equation.

Methane burning to liquid water. CH₄(g) + 2 O₂(g) → CO₂(g) + 2 H₂O(l). With values from the table of enthalpies of formation:

ΔH° = (−393.51 + 2 · (−285.83)) − (−74.6 + 2 · 0) = −965.17 + 74.6 = −890.57 kJ/mol.

Why it works

Enthalpy is a state function: its change depends only on the start and the end. So the reaction can be thought of in two steps. First the reactants are taken apart into elements, which costs −Σ n · ΔHf°(reactants). Then the products are built from the same elements, which gives Σ n · ΔHf°(products). The two steps add up to the reaction’s ΔH°.

The coefficient

Two moles of water form, so water’s enthalpy of formation counts twice. Taking each substance once gives an answer that looks just as plausible:

Working ΔH°
Right: −393.51 + 2 · (−285.83) + 74.6 −890.57 kJ/mol
Coefficient forgotten: −393.51 − 285.83 + 74.6 −604.74 kJ/mol

So the card above has a list of coefficients beside every list of enthalpies. If a coefficient is missing, the card says so before anything is worked out.

The state matters too. If the water forms as vapour, with ΔHf° = −241.826 kJ/mol, the answer is −802.56 kJ/mol. The difference is what the water gives off as it condenses.

A second example: burning limestone

CaCO₃(s) → CaO(s) + CO₂(g):

ΔH° = (−634.92 + (−393.51)) − (−1207.4) = +178.97 kJ/mol.

The answer is positive. The reaction is endothermic, which is why a lime kiln has to be kept hot.

Where next

When there are no enthalpies of formation for the substances, the reaction enthalpy can be estimated from bond enthalpies — where the reactants come first, the opposite of here. Heat per mole reacted is the molar enthalpy.

Common mistakes

Common questions

Why is the enthalpy of formation of O₂ zero? Enthalpies of formation are measured from the elements in their standard states. Oxygen gas is oxygen’s standard state, so there is nothing to form.

Is Hess’s law the same as adding up reactions? Yes, it is the same law. Adding reactions and their ΔH is the general form; the formula with enthalpies of formation is the special case where every step forms one substance from its elements.

Looking for another letter? The formula solved for each one
Solved for each letter
Solve forRearrangedWith the numbersComes to
ΔH°ΣnpiΔHpi−(ΣnriΔHri)1·(−393.51)+2·(−285.83)−(1·(−74.6)+2·0)−890.57

Standard enthalpies of formation

Table

Standard enthalpies of formation
SubstanceFormulaΔHf° (kJ/mol)
Elements in their standard states
HydrogenH₂(g)0
OxygenO₂(g)0
NitrogenN₂(g)0
ChlorineCl₂(g)0
Carbon (graphite)C(s)0
Inorganic substances
Water, liquidH₂O(l)−285.830
Water vapourH₂O(g)−241.826
Carbon dioxideCO₂(g)−393.51
Carbon monoxideCO(g)−110.53
AmmoniaNH₃(g)−45.94
Hydrogen chlorideHCl(g)−92.31
Hydrogen fluorideHF(g)−273.30
Hydrogen sulfideH₂S(g)−20.6
Sulfur dioxideSO₂(g)−296.81
Nitrogen dioxideNO₂(g)33.10
Sodium chlorideNaCl(s)−411.12
Calcium oxide (quicklime)CaO(s)−634.92
Calcium carbonate (calcite)CaCO₃(s)−1,207.4
Magnesium oxideMgO(s)−601.60
Aluminium oxideAl₂O₃(s)−1,675.7
Zinc oxideZnO(s)−350.46
Organic substances
MethaneCH₄(g)−74.6
EthaneC₂H₆(g)−84
Ethene (ethylene)C₂H₄(g)52.4
PropaneC₃H₈(g)−104.7
MethanolCH₃OH(l)−239.5
EthanolC₂H₅OH(l)−276
BenzeneC₆H₆(l)49

Sources

(11)

Last reviewed October 6, 2026 ·How pages are reviewed

StoichiometryAll formulas

Put this formula on your site

Copy the code into your page where the formula card should appear. It loads from lovetocalc.com, so it stays current on its own — all we ask is that the credit line comes with it.