Percent yield
Y
What the reaction gave, as a percentage of what the calculation said it could give.
Y=85%
Y equals (100 times 8.5) divided by 10, equals 850 divided by 10, equals 85 %
Den här sidan finns på svenska. Byt till svenska
Definition — what does that mean?
The calculation says what the reaction should give. The balance says what it gave. The yield is the ratio.
In Swedish: Utbyte
Y
What the reaction gave, as a percentage of what the calculation said it could give.
Y=85%
Y equals (100 times 8.5) divided by 10, equals 850 divided by 10, equals 85 %
You are given
m_actual is the mass of product you actually got, m_theoretical the mass stoichiometry says you
could have got, and Y the yield as a percentage.
The hundred is written out for the same reason it is in efficiency: you are holding two masses in grams, and the step that turns them into a percentage belongs on the page.
The yield is a second step. First m_theoretical is worked out from the reaction equation:
That number is a ceiling. Then you weigh what you got.
| Cause | What happens |
|---|---|
| Incomplete reaction | Equilibrium settles before everything has reacted |
| Side reactions | Some of the starting material becomes something else |
| Transfer losses | Product stays on the filter, in the beaker, on the spatula |
| Purification | Recrystallisation throws away impurities — and a little product with them |
A yield of 70–90% is an ordinary laboratory result. Industrially every percent is chased, because what is missing becomes waste somebody has to pay to handle.
A school lab. The calculation gave 10 g, the balance read 8.5 g. Y = 100 · 8.5 / 10 = 85%.
Aspirin. Theoretically 5.2 g, got 4.1 g. Y = 100 · 4.1 / 5.2 ≈ 78.8%.
The other way round. You want 30 g of product from a reaction that usually yields 75%. m_theoretical = 100 · 30 / 75 = 40 g, so weigh out enough starting material for 40 g.
m_actual and m_theoretical have to be about the same
product.Can the yield go above 100%?
Arithmetically yes, in reality no. A yield above a hundred always means the product weighs more than
it should — damp, unpurified or weighed wrongly.
Can yield be worked out in moles rather than grams?
Perfectly well, as long as both numbers are in the same unit. The ratio comes out the same.
What counts as a good yield?
It depends entirely on the reaction. A simple precipitation can give 95%, a multi-step synthesis 20%
and still count as a success — each step multiplies with the others.
| Solve for | Rearranged | With the numbers | Comes to |
|---|---|---|---|
| mactual | mtheoreticalY100 | 10·85100 | 8.5 g |
| mtheoretical | 100mactualY | 100·8.585 | 10 g |
| Y | 100mactualmtheoretical | 100·8.510 | 85 % |
Last reviewed October 6, 2026 ·How pages are reviewed
Copy the code into your page where the formula card should appear. It loads from lovetocalc.com, so it stays current on its own — all we ask is that the credit line comes with it.