E°cell = E°cathode − E°anode
Both values are standard reduction potentials, read from the
table of standard reduction potentials exactly as they are
printed, signs included. The cathode is the electrode where reduction happens, and it is the one with the higher E°.
The anode is where oxidation happens. Its half-reaction runs backwards compared with the table, but its value is not
flipped: the minus sign in the formula takes care of that.
Holds at standard conditions: 25 °C, 1 mol/dm³ of every ion and 1 bar for gases.
The Daniell cell. A zinc rod in zinc sulfate solution and a copper rod in copper sulfate solution. From the table,
Cu²⁺ + 2e⁻ ⇌ Cu has E° = +0.3419 V and Zn²⁺ + 2e⁻ ⇌ Zn has E° = −0.7618 V. Copper is higher, so copper is the cathode:
E°cell = 0.3419 − (−0.7618) = 0.3419 + 0.7618 = 1.1037 V, about 1.10 V.
The minus sign
Zinc’s value is negative, and subtracting a negative number is adding. Adding the two values instead, or subtracting
the wrong way round, gives a number that looks like an answer:
| Working |
E°cell |
| Right: 0.3419 − (−0.7618) |
+1.1037 V |
| Added: 0.3419 + (−0.7618) |
−0.4199 V |
| Reversed: −0.7618 − 0.3419 |
−1.1037 V |
All three are voltages of a plausible size. Only the first is the cell’s.
A second example: a negative answer
A cell is built from a silver electrode and a copper electrode, and someone has guessed that copper is the cathode.
From the table, Ag⁺ + e⁻ ⇌ Ag has E° = +0.7996 V:
E°cell = 0.3419 − 0.7996 = −0.4577 V.
A negative answer does not mean the cell does not work. It means the electrodes have been named the wrong way round.
Silver is higher in the series, so silver is the cathode and copper the anode, and the cell gives +0.4577 V. A cell
runs in the direction that gives a positive voltage.
Some cells side by side
| Cell |
Cathode, E° |
Anode, E° |
E°cell |
| Daniell cell |
Cu²⁺/Cu, +0.3419 V |
Zn²⁺/Zn, −0.7618 V |
1.1037 V |
| Lead–acid battery |
PbO₂/PbSO₄, +1.6913 V |
PbSO₄/Pb, −0.3588 V |
2.0501 V |
| Hydrogen–oxygen fuel cell |
O₂/H₂O, +1.229 V |
H⁺/H₂, 0 V |
1.229 V |
| Silver–copper |
Ag⁺/Ag, +0.7996 V |
Cu²⁺/Cu, +0.3419 V |
0.4577 V |
The lead–acid battery’s 2.05 V is the voltage of one of a car battery’s six cells. In the silver–copper cell both
values are positive, which makes it plain that they are subtracted.
Where next
E°cell holds at standard conditions, 1 mol/dm³ of every ion. At other concentrations the voltage moves, and the
Nernst equation says by how much, starting from E°cell. How
much substance a current deposits is
Faraday’s law of electrolysis.
Common mistakes
- Adding the two values. It is cathode minus anode, not the sum of the half-cells.
- Subtracting the wrong way round. Anode minus cathode gives the same number with the wrong sign.
- Flipping the anode’s sign before putting it in. Then it is flipped twice. Both go in as reduction potentials,
exactly as the table prints them.
- Multiplying E° by the coefficient. A potential does not depend on how many electrons the half-reaction is
written with. 2Ag⁺ + 2e⁻ ⇌ 2Ag is still 0.7996 V.
Common questions
Which electrode is the cathode?
The one with the higher reduction potential in the series. It is where electrons are taken up. In a galvanic cell
the cathode is the positive terminal and the anode the negative one.
Why is the hydrogen electrode’s E° zero?
Only the difference between two electrodes can be measured. The standard hydrogen electrode was chosen as the zero,
and every other value in the table is measured against it.
Why does a real battery give a different voltage?
E°cell holds at 25 °C and 1 mol/dm³ of every ion. A battery has other concentrations, and they change as it runs
down. That is what the Nernst equation accounts for.