p is the rms sound pressure in pascals, p₀ = 20 µPa = 0.00002 Pa is the reference sound pressure and
L the sound pressure level in decibels. A sound pressure of 0.2 Pa gives
L = 20 · log(0.2 / 0.00002) = 20 · log 10,000 = 80 dB. The logarithm is base 10; Swedish books write
it lg.
Holds for sound in air and other gases, where the 20 µPa reference is used. Underwater a different
reference, 1 µPa, is used, and the same pressure then gives a higher figure.
20, not 10
Sound intensity level has a factor of 10:
L = 10 · log(I / I₀). Intensity is proportional to the pressure squared, and log(p²) = 2 · log p. That 2
becomes the factor of 20 here. For the same sound in air the two formulas give the same number of
decibels.
With 10 instead of 20, 0.2 Pa comes out at only 40 dB, half the answer.
| Sound pressure |
Sound pressure level |
| 0.00002 Pa |
0 dB |
| 0.002 Pa |
40 dB |
| 0.02 Pa |
60 dB |
| 0.2 Pa |
80 dB |
| 2 Pa |
100 dB |
| 20 Pa |
120 dB |
Ten times the pressure is 20 dB more. Twice the pressure is 20 · log 2 ≈ 6 dB more, while twice the
intensity is 3 dB.
Worked examples
From a pressure. 0.5 Pa: L = 20 · log(0.5 / 0.00002) = 20 · log 25,000 ≈ 88.0 dB.
The pressure from a level. At 94 dB, p = 0.00002 · 10^(94/20) ≈ 1.0 Pa, a level sound level
meter calibrators often work at.
Common mistakes
- 10 instead of 20. The factor 10 belongs to intensity, 20 to pressure.
- Using the peak pressure. The formula takes the rms value.
- Adding decibels. Two 80 dB sounds do not make 160 dB. Add the intensities and convert back.
Frequently asked questions
Why is the reference 20 µPa?
It is a defined value, roughly the faintest sound pressure a normal ear detects at 1,000 Hz. It is set
in the standards for acoustical reference values (ISO 1683, ANSI/ASA S1.1) and corresponds to 0 dB.
What is dB(A)?
A sound pressure level where the meter has first weighted the frequencies roughly as the ear hears them,
so low notes count for less. The formula is the same; the pressure put in has been filtered.