Skip to content
LoveToCalc

Definition — what does that mean?

Magnetic flux

How much magnetic field passes through a loop. When it changes, a voltage appears.

In Swedish: Magnetiskt flöde

Magnetic flux

The relation

Φ=BA

Flux density times area, for a field passing straight through the surface. It counts how much field goes through a loop, and a change in it is what induces a voltage.

A flat loop with the area A, seen at a slant, in a uniform magnetic field B. The arrows are the field lines, crossing the loop from left to right. Φ is the magnetic flux through the loop.
Solve for

Φ=0.1Wb

Φ equals 0.5 times 0.2, equals 0.1 Wb

Working2 steps

Practice questions

You are given

  • Φ=3.15Wb
  • B=0.9T

Round to 2 decimals.

The formula

Φ = B · A

Φ is the magnetic flux in webers (Wb), B the flux density in tesla and A the area in square metres. The formula holds when the field passes straight through the surface. Tilt the surface and the flux gets smaller; lay it along the field and none passes through.

Flux density is flux per area, which is where its name comes from: 1 T = 1 Wb/m².

Why flux matters

A steady flux does nothing noticeable. But when the flux through a coil changes, a voltage is induced in it, by Faraday’s law. The flux can change in three ways: the field gets stronger or weaker, the area changes, or the loop turns. The last is how a generator works.

Worked examples

The defaults. B = 0.5 T through 0.2 m²: Φ = 0.5 · 0.2 = 0.1 Wb.

A small loop. A square loop 10 cm × 10 cm, which is 0.01 m², in a 0.8 T field: Φ = 0.8 · 0.01 = 0.008 Wb.

Common mistakes

Frequently asked questions

What is a weber? The flux when one tesla passes through one square metre. If the flux through a loop changes by 1 Wb in one second, 1 V is induced.

Looking for another letter? The formula solved for each one
Solved for each letter
Solve forRearrangedWith the numbersComes to
BΦA0.10.20.5 T
AΦB0.10.50.2 m²
ΦBA0.5·0.20.1 Wb

Last reviewed September 24, 2026 ·How pages are reviewed

ElectricityAll formulas

Put this formula on your site

Copy the code into your page where the formula card should appear. It loads from lovetocalc.com, so it stays current on its own — all we ask is that the credit line comes with it.