Skip to content
LoveToCalc

Definition — what does that mean?

Real power

The power that actually becomes heat, light or motion — voltage times current times the power factor.

In Swedish: Aktiv effekt

Real power

The relation

P=UIcos φ

The power an AC circuit actually converts: rms voltage times rms current times the power factor cos φ. With cos φ = 1, as in a heater, it is plain U·I.

Solve for

P=1,840W

P equals (230 times 10) times 0.8, equals 2,300 times 0.8, equals 1,840 W

Working3 steps

Practice questions

You are given

  • P=8000W
  • U=400V
  • I=25A

The formula

U and I are the rms voltage and current, cos φ is the power factor and P the real power in watts. Many English books write the voltage as V, so the formula reads P = V·I·cos φ. A motor drawing 10 A from 230 V at cos φ = 0.8 converts 230 · 10 · 0.8 = 1,840 W.

Holds when U and I are rms values of a sinusoidal alternating current and φ is the phase difference between them.

Watts or volt-amperes

U·I alone is the apparent power in volt-amperes. The power factor says how much of it is converted:

Load cos φ U · I P
Kettle 1 2,001 VA 2,001 W
Motor 0.8 2,300 VA 1,840 W
Motor, lightly loaded 0.6 2,300 VA 1,380 W

For a purely resistive heater cos φ = 1, and the formula becomes the familiar electric power P = U·I. That is why U·I gives the right answer for a kettle and too much for a motor.

Worked examples

The kettle. 8.7 A at 230 V and cos φ = 1: P = 230 · 8.7 · 1 = 2,001 W.

A workshop machine. 6.5 A at 230 V with cos φ = 0.85: P = 230 · 6.5 · 0.85 = 1,270.75 W, while the apparent power is 1,495 VA.

The current from the power. A 1,840 W motor at 230 V with cos φ = 0.8 draws I = 1,840 / (230 · 0.8) = 10 A — not the 8 A that 1,840 / 230 gives.

The power factor from a measurement. A meter reads 1,380 W, 230 V and 10 A: cos φ = 1,380 / 2,300 = 0.6.

Common mistakes

Frequently asked questions

Where does the power factor come from? Coils and capacitors make the current fall out of step with the voltage. In an RLC circuit cos φ is the resistance divided by the impedance, see power factor.

Does a household pay for watts or volt-amperes? A household electricity meter normally counts energy in kilowatt hours, that is real power times time.

Looking for another letter? The formula solved for each one
Solved for each letter
Solve forRearrangedWith the numbersComes to
UPIcos φ1,84010·0.8230 V
IPUcos φ1,840230·0.810 A
cos φPUI1,840230·100.8
PUIcos φ230·10·0.81,840 W

Last reviewed October 6, 2026 ·How pages are reviewed

Calculate it in practice

ElectricityAll formulas

Put this formula on your site

Copy the code into your page where the formula card should appear. It loads from lovetocalc.com, so it stays current on its own — all we ask is that the credit line comes with it.