Skip to content
LoveToCalc

Definition — what does that mean?

EMF of a moving rod

Push a conductor across a magnetic field and a voltage appears between its ends. It is the simplest generator there is.

In Swedish: Emk för en rörlig ledare

EMF of a moving rod

The relation

ε=Blv

Flux density times length times speed, for a rod sliding at right angles to a field. It is the simplest generator: push the rod and a voltage appears across its ends.

A metal rod of length l slides to the right with the speed v along two rails joined at the left end, in a magnetic field B that points out of the page (the dots). ε is the emf induced round the circuit.
Solve for

ε=1V

ε equals 0.5 times (0.2 times 10), equals 0.5 times 2, equals 1 V

Working3 steps

Practice questions

You are given

  • B=0.6T
  • l=1.7m
  • v=11m/s

Round to 2 decimals.

What the formula says

ε is the induced EMF in volts, B the flux density in tesla, l the length of the rod in the field and v its speed, all at right angles to each other.

Worked examples

Why it is the induction law

In one second the rod sweeps an area l · v, so the flux through the circuit it closes changes by B · l · v every second. The induction law, ε = ΔΦ / Δt, gives exactly this. The same result also follows from the force on the charges in the rod: each is pushed along it by the magnetic force on a moving charge.

Lenz’s law brakes it

If the rod is part of a closed circuit, a current flows, and the field pushes back on that current. It takes a force to keep the rod moving, and the work done equals the electrical energy delivered, if friction can be neglected.

Common questions

What if the rod moves at an angle? Only the part of the velocity at right angles to both the field and the rod counts. A rod moving along the field lines induces nothing.

Looking for another letter? The formula solved for each one
Solved for each letter
Solve forRearrangedWith the numbersComes to
Bεlv10.2·100.5 T
lεBv10.5·100.2 m
vεBl10.5·0.210 m/s
εBlv0.5·0.2·101 V

Last reviewed October 6, 2026 ·How pages are reviewed

ElectricityAll formulas

Put this formula on your site

Copy the code into your page where the formula card should appear. It loads from lovetocalc.com, so it stays current on its own — all we ask is that the credit line comes with it.