Gravel in tonnes
m
Area times depth is the volume; times the density of the material, it is what the lorry weighs.
m=2.4
m equals (30 times 0.05) times 1.6, equals 1.5 times 1.6, equals 2.4
Den här sidan finns på svenska. Byt till svenska
Definition — what does that mean?
Area times depth is the volume; times the density of the material, it is what the lorry weighs.
In Swedish: Grusåtgång i ton
m
Area times depth is the volume; times the density of the material, it is what the lorry weighs.
m=2.4
m equals (30 times 0.05) times 1.6, equals 1.5 times 1.6, equals 2.4
You are given
Round to 2 decimals.
Gravel is ordered by the tonne but spread by the cubic metre. This formula goes between the two: work out the volume as area times depth, then multiply by the material’s density ρ, in tonnes per cubic metre.
A drive of 30 m² with 5 cm of gravel holds 1.5 m³. At a density of 1.6 tonnes/m³ it weighs 30 · 0.05 · 1.6 = 2.4 tonnes.
The figure in the formula you do not measure yourself is ρ. It depends on the material, the grading and how wet it is, and it is on the supplier’s product sheet or the weighbridge ticket.
Ask for it before you order. The difference between two materials can be tens of per cent, and it goes straight through to the weight — and to the price, since gravel is often sold by the tonne.
If you are unsure, order by volume instead and let the supplier convert. They have the density for the material they are actually loading.
The depth in the formula is the finished, compacted thickness. Loose gravel is deeper before it is compacted, and how much it settles depends on the grading and on how it is rolled.
A thin layer on a garden path is a different thing from a sub-base spec for a drive that has to carry a car. The thickness comes from whatever build spec you are following; the formula only converts it to tonnes.
Drive. 40 m² at 8 cm and a density of 1.6: 40 · 0.08 · 1.6 = 5.1 tonnes.
Path. 12 m long and 1 m wide, 5 cm, density 1.5: 12 · 0.05 · 1.5 = 0.9 tonnes.
Drainage. 20 m² at 20 cm and a density of 1.4: 20 · 0.20 · 1.4 = 5.6 tonnes.
Backwards. Three tonnes over 25 m² at a density of 1.6 covers 3 / (25 · 1.6) = 0.075 m, that is 7.5 cm.
Where do I find the density?
On the supplier’s product sheet, on the weighbridge ticket, or by asking. It varies with material,
grading and moisture.
How do I convert tonnes back to cubic metres?
Divide the weight by the density. Tonnes divided by tonnes per cubic metre is cubic metres.
Does the formula work for sand, crushed stone and soil?
Yes. Only ρ changes — the calculation is the same for anything sold by weight.
| Solve for | Rearranged | With the numbers | Comes to |
|---|---|---|---|
| A | mdρ | 2.40.05·1.6 | 30 |
| d | mAρ | 2.430·1.6 | 0.05 |
| ρ | mAd | 2.430·0.05 | 1.6 |
| m | Adρ | 30·0.05·1.6 | 2.4 |
Last reviewed October 6, 2026 ·How pages are reviewed
Copy the code into your page where the formula card should appear. It loads from lovetocalc.com, so it stays current on its own — all we ask is that the credit line comes with it.