Skip to content
LoveToCalc

Theorem — what does that mean?

Surface area of a cylinder

Two circles and a rectangle — the lid, the base, and the side unrolled flat.

In Swedish: Cylinderns begränsningsarea

Surface area of a cylinder

The relation

A=2πr²+2πrh

Two circles and a rectangle: the lid, the base, and the side unrolled flat.

A cylinder seen at an angle, so its circular base is drawn as an ellipse with its far edge dashed. The radius r runs from the centre of the top to its edge, and the height h along the side. The lid and the side are lit: the surface area A is its skin, not its inside.
Solve for

A≈150.7964cm²

A equals ((2 times π) times 2 squared) plus (((2 times π) times 2) times 10), is approximately (6.2832 times 4) plus ((6.2832 times 2) times 10), is approximately 25.1327 plus (12.5664 times 10), is approximately 25.1327 plus 125.6637, is approximately 150.7964 cm²

Working5 steps

Practice questions

You are given

  • r=7cm
  • h=5cm

Round to 1 decimal.

Pick the unit your lengths are in. Areas are then labelled in square units and volumes in cubic units; nothing is converted.

What the formula says

Cut a tin can down the side and unfold it. You get three flat pieces:

Holds when the cylinder is upright, that is, when the curved side stands at right angles to the base.

The formula’s two terms are therefore two kinds of piece: the circles and the curved side.

The curved side alone

Often it is only the curved side that matters — a label round a tin, a sheet to be rolled into a pipe. Then the answer is 2πrh.

Worked examples

A tin with a radius of 4 cm and a height of 11 cm. The circles give 2π · 16 ≈ 100.5 cm², the curved side 2π · 4 · 11 ≈ 276.5 cm². The total is ≈ 377 cm².

The label alone on the same tin is the curved side, ≈ 277 cm² — just under three quarters of the total.

Backwards to the height. A cylinder with a radius of 2 dm has a surface area of 150.8 dm². The circles take 2π · 4 ≈ 25.1 dm², and the rest is the curved side: (150.8 − 25.1) / (2π · 2) ≈ 10 dm.

Common mistakes

Common questions

Why is the curved side 2πrh? Because it becomes a rectangle when unrolled. One side of that rectangle is the cylinder’s height, the other is the circle’s circumference.

How do I calculate an open vessel? Subtract one circle: πr² + 2πrh instead of 2πr² + 2πrh.

Can the radius be found from the area? Yes, but it takes a quadratic. The area is quadratic in the radius, so the solution is the quadratic formula — and only the positive root is a cylinder.

Looking for another letter? The formula solved for each one
Solved for each letter
Solve forRearrangedWith the numbersComes to
rh²+2Aπ−h210²+2·150.8π−1022 cm
hA−2πr²2πr150.8−2π·2²2π·210 cm
A2πr²+2πrh2π·2²+2π·2·10150.8 cm²

Last reviewed October 6, 2026 ·How pages are reviewed

Ready-made worksheets with this formula

Sheets that ask this formula, with their answer keys. Open one to see the questions or print it.

High school

  • Cones and cylinders

    Sixteen questions on the surface area of the cylinder and the volume, lateral area and surface area of the cone. The first one is worked. Calculator allowed.

More about the cylinder

The same drawing, measured in the other ways it can be measured.

GeometryAll formulas

Put this formula on your site

Copy the code into your page where the formula card should appear. It loads from lovetocalc.com, so it stays current on its own — all we ask is that the credit line comes with it.