Paint needed
V
The area to be painted, times the number of coats, divided by what the tin covers per litre.
V=10
V equals (40 times 2) divided by 8, equals 80 divided by 8, equals 10
Den här sidan finns på svenska. Byt till svenska
Definition — what does that mean?
The area to be painted, times the number of coats, divided by what one litre covers.
In Swedish: Färgåtgång
V
The area to be painted, times the number of coats, divided by what the tin covers per litre.
V=10
V equals (40 times 2) divided by 8, equals 80 divided by 8, equals 10
You are given
Round to 1 decimal.
Three things decide how much paint you need: how large the surface is, how many times you go over it, and how far a litre goes. The coverage r is printed on the tin, in square metres per litre.
A wall of 40 m² painted twice with a paint that covers 8 m²/l needs 40 · 2 / 8 = 10 litres.
The figure on the label assumes a smooth, primed surface. A real surface often takes more: plaster, bare timber and filled joints all absorb.
That is why manufacturers often print a range — use the lower figure on an absorbent surface. Same formula, different r.
A wall’s area is width times height, but windows and doors come off. An ordinary window is around one and a half square metres, a door about two.
Meanwhile the plan drawing hides what gets added: architraves, skirting and reveals. As a rule of thumb the two cancel in a normal room — but in a room with a lot of glass it pays to measure.
One room. Four walls, 12 m around and 2.5 m high, is 30 m². Two coats at 10 m²/l: 30 · 2 / 10 = 6 litres.
Ceiling. 4 × 5 m is 20 m². Two coats at 7 m²/l: 20 · 2 / 7 ≈ 5.7 litres.
Backwards. You have 5 litres left and the paint covers 9 m²/l. One coat takes you 5 · 9 / 1 = 45 m².
The coverage. 60 m² took 15 litres in two coats, so the coverage was 60 · 2 / 15 = 8 m²/l.
Do I subtract windows and doors?
Yes, if they are large or numerous. In a room with one window, the architraves and reveals you gain
usually eat the deduction.
How much paint does a facade take?
The same formula, but coverage is lower on sawn cladding than on planed, and the primer is its own
coat with its own coverage.
Does the formula work for primer?
Yes. A primer is one more coat with its own r — work it out separately and add the two.
| Solve for | Rearranged | With the numbers | Comes to |
|---|---|---|---|
| A | Vrn | 10·82 | 40 |
| n | VrA | 10·840 | 2 |
| r | AnV | 40·210 | 8 |
| V | Anr | 40·28 | 10 |
Last reviewed October 6, 2026 ·How pages are reviewed
Copy the code into your page where the formula card should appear. It loads from lovetocalc.com, so it stays current on its own — all we ask is that the credit line comes with it.