Skip to content
LoveToCalc

Paint calculator

The wall area worked out from the measurements you have, and the litres from the coverage printed on your tin.

Your numbers

What you are painting

The floor, measured along two walls. All four walls are worked out from it.

Floor to ceiling, or the height of the fence.

What you are leaving unpainted: width × height of each, added up. A door measured at 0.9 × 2.1 m is 1.89 m².

How many square metres one litre covers in one coat. It is printed on the tin and differs by product, so nothing is filled in here — and without it there are no litres.

From the same label. Leave it at 0 if you only want the litres.

Result

Litres of paint

–

Put a second set of numbers beside this one and see the difference.

Tins to buy
–
Area to paint, m²
35
Total to cover, m²
70

4 × 3 m with the ceiling at 2.5 m gives 35 m² of wall. In 2 coats that is 70 m² to cover, and at the coverage on your tin, – litres.

The coverage and the tin size are the two numbers on your own tin, and neither is filled in for you, because both differ by product, colour and surface. A coverage figure assumes a smooth, primed surface, so bare plaster or bare wood takes more than it says. Nothing is added for waste, and only the openings you type are deducted. Anything sold by square metres per litre works here — primer, wood stain, floor oil, varnish, wallpaper paste. A product sold the other way round, as kilos per square metre, is the reciprocal: divide 1 by that figure first.

What this answers

Few people know their wall area. They know the room is four metres by three, that the ceiling is about two and a half, and that there is a door and a couple of windows in it. This page starts from those numbers: it works out the wall area, takes the openings off, multiplies by the number of coats, and divides by the coverage figure on your tin.

The one number it will not guess is that coverage figure. It is printed on every tin, it differs by product, colour and surface, and no single value would be right for the tin in your hand. Type it in and the litres appear.

How the area is entered

A room. Give the two floor measurements and the ceiling height. The four walls are worked out from them as the perimeter of the rectangle times the height — a room four by three metres has fourteen metres of wall around it, not sixteen.

A wall or a fence. Give one surface’s length and height, and how many surfaces of that size there are. A fence painted on both sides is two. A ceiling is one surface: its two floor measurements.

The area. If you already know the square metres, type them and skip the geometry.

Doors and windows

One field, in square metres: measure each opening, multiply width by height, add them together. A door measured at 0.9 × 2.1 m is 1.89 m²; a window at 1.2 × 1.2 m is 1.44 m².

Leave it at zero and you get the wall area with nothing deducted. That is an over-estimate, which is the safe direction: a half-tin left over beats a second trip and a batch of colour that does not quite match.

Formula

Wall area = 2 · (length + width) · height

To cover = (wall area − openings) · coats

Litres = to cover / coverage

Tins = litres / tin size, rounded up

Worked example

A room 4.00 × 3.00 m with a 2.50 m ceiling:

The coverage, and where to find it

The figure is on the tin, usually as “covers up to 10 m²/l” or “2.5 l covers 25 m²”. The two say the same thing: divide the square metres by the litres and you have the coverage. Both numbers are on the same label, which is why the page asks for both — the tin size is what turns litres into a number of tins.

Coverage figures usually assume a smooth, primed surface. Bare plaster, bare wood and a strong colour change all take more, and a first coat takes more than a second.

Not only paint

Anything sold by square metres per litre goes through the same arithmetic: primer, wood stain, floor oil, varnish, façade paint, wallpaper paste. The arithmetic is the same whatever is in the tin.

One thing to watch. Some materials are quoted the other way round, as consumption per square metre — tile adhesive at kilos per square metre, levelling compound in millimetres of thickness. Those are not coverage figures. If the label reads “per m²”, divide 1 by it before typing it in.

What is not included

Common questions

Why is the litres field empty when I open the page? Because the coverage is. It is printed on the tin and it varies by product, so filling in a plausible number would be a guess dressed up as an answer. The square metres are worked out straight away; the litres wait for the one number only you have.

How many coats do I need? The page does not decide that for you — it is a plan, not a calculation. Two is the usual starting point, and a strong colour change or a bare surface takes more.

Does it work for a ceiling? Yes. Choose a wall or a fence and give the ceiling’s two floor measurements as the length and the height, with one surface.

Can I compare two rooms? Yes. Add a second scenario and the two sets of measurements are worked out side by side, with the difference in litres between them.

Last reviewed October 6, 2026 ·How pages are reviewed

The formula behind this

All everyday calculators

Put this calculator on your site

Copy the code into your page where the calculator should appear. It loads from lovetocalc.com, so it stays current on its own — all we ask is that the credit line comes with it.