What this calculator answers
The tumble dryer, the heater in the garage, the computer left on overnight, the old freezer in the basement: what does it cost to keep running? This calculator takes the three numbers you can actually find out — the power from the label, how long it runs, and the price per kilowatt-hour from your bill — and turns them into money per month and per year.
Formula
kWh per day = (P / 1000) × t
kWh per year = kWh per day × d × (365 / 7)
Cost = kWh × price
- P — power in watts
- t — hours a day it actually runs
- d — days a week it runs
Dividing by 1000 is the step to watch: the label is written in watts and electricity is priced in kilowatt-hours. The relation behind it is on cost of electricity.
Worked examples
A 1000 W heater, around the clock, every day, at $0.30/kWh. It uses 24 kWh a day and 8760 kWh a year — one kilowatt times the 8760 hours in a year. At $0.30 that is $2628 a year, or $219 a month.
An old 150 W freezer running continuously uses 3.6 kWh a day and 1314 kWh a year: about $394. A new one at 50 W would cost a third of that; the last question below turns the difference into a payback time.
A 2500 W tumble dryer, 1.5 hours, four days a week uses 3.75 kWh a load and 782 kWh a year — about $235. Drying outdoors half the year halves it.
Watts or kilowatts on the label?
If it says W, type the number as it stands. If it says kW, multiply by 1000 first: 2.2 kW is 2200 W. If it gives only amps and volts — common on older appliances — the power is amps times volts, so 10 A at 230 V is 2300 W.
What is not included
- Standby. An appliance switched off but plugged in often draws 1–3 W. Run it as a second scenario at 24 hours a day if you want to see what that costs.
- Power that varies. Fridges, freezers and heat pumps cycle on and off. The rating gives a figure on the high side; a plug-in meter gives the real one.
- Prices that vary through the day. This works from one average price. On a time-of-use tariff, with the washing done at night, your real cost is lower than this.
- Standing charges. Your connection and capacity fees are there whether the appliance is on or not.
Common questions
Which price should I enter?
The one you pay per kilowatt-hour, all in: energy, the per-kWh network charge and tax. Take the bill
less its fixed monthly fees, divide by the kilowatt-hours on the same bill, and you have your own
average. It is usually well above the wholesale price quoted in the news.
How much does a whole household use?
This is a calculator for one appliance at a time. Your household total is on the bill — and then the
interesting question is which appliance accounts for which part of it, which you get by running them
one by one here.
Why doesn’t this match my bill?
Because a rating is a ceiling rather than an average, and because standing charges are not included
here. Treat it as a way to compare appliances with each other, not as a forecast of the bill.
Is it worth replacing an old appliance?
Run the old one and the new one as two scenarios side by side and compare the yearly cost. The
difference is what the replacement saves a year; divide the purchase price by it and you have the
number of years before it pays for itself.