Price per square metre
k
The price divided by the floor area. It is what makes two homes of different sizes comparable, and it is the number an advert leaves out.
k=50,000
k equals 3,600,000 divided by 72, equals 50,000
Den här sidan finns på svenska. Byt till svenska
Definition — what does that mean?
The number that makes two homes of different sizes comparable — and the one an advert rarely prints.
In Swedish: Kvadratmeterpris
k
The price divided by the floor area. It is what makes two homes of different sizes comparable, and it is the number an advert leaves out.
k=50,000
k equals 3,600,000 divided by 72, equals 50,000
You are given
Round to 0 decimals.
The price per square metre is the price divided by the area:
where p is the price, A the floor area in square metres and k the price per square metre. A flat
costing 3,600,000 with 72 m² of floor area works out at 3,600,000 / 72 = 50,000 per m².
It is a definition — it says what the words mean — and the same division as every other unit price. Price per kilo, price per litre and price per square metre are one calculation with different denominators.
The relation has three unknowns, and all three get asked in earnest:
What is the rate? Divide the price by the area. 2,750,000 over 55 m² is 50,000 per m².
What should it cost? Multiply. If the area is going for 48,000 per m² and the flat is 63 m², then 48,000 · 63 = 3,024,000. That is where a valuation starts.
How big is it? Divide the price by the rate. An advert quoting 4,200,000 and 56,000 per m² is describing 4,200,000 / 56,000 = 75 m².
It is a comparison figure, not a verdict. Two flats at 50,000 per m² are not equally good value, and the differences are rarely small:
| What the rate divides out | Why it matters |
|---|---|
| Service charge | At around 5% interest, 2,000 a month is the interest on 500,000 |
| Floor and lift | Same area, different market |
| Ancillary space and balcony | Not counted in the floor area, but counted in the price |
| Condition | Newly refurbished and worn out share a rate all the time |
There is also a systematic effect: small flats tend to carry a higher rate than large ones. A kitchen and a bathroom cost about the same to build however many square metres surround them, so a one-bedroom flat spreads those costs over fewer metres. A studio priced above a four-room flat in the same stairwell is normal, not a bargain in either direction.
The rate is also a convenient way to handle a price movement. If an area rises 8%, the rate rises 8% — the same change factor, because the area does not move. 50,000 · 1.08 = 54,000 per m², and on 72 m² that is 3,888,000.
Does the balcony count towards the floor area?
No. Floor area is measured inside the external walls and excludes balconies, terraces and garages. The
balcony does affect the price, which is one reason two identical rates can describe two very different
homes.
What is a good price per square metre?
The question cannot be answered without an area to compare against. The figure is built for comparisons
within one market — between two properties in the same neighbourhood, or against the same neighbourhood
a year ago. Between two cities it says almost nothing.
Does it work for houses?
Yes, but less well. A large share of a house’s price sits in the plot, and the plot is not in the floor
area. Two houses at the same rate can have very different amounts of land, and then the figure is not
comparing what you think it is.
| Solve for | Rearranged | With the numbers | Comes to |
|---|---|---|---|
| p | kA | 50,000·72 | 3,600,000 |
| A | pk | 3,600,00050,000 | 72 |
| k | pA | 3,600,00072 | 50,000 |
Last reviewed October 6, 2026 ·How pages are reviewed
Copy the code into your page where the formula card should appear. It loads from lovetocalc.com, so it stays current on its own — all we ask is that the credit line comes with it.